About 50 results
Open links in new tab
  1. How many inches does 15mm equal? - Answers

    Aug 11, 2023 · How do you convert 15mm to inch? 1 mm is equal approximately to 0.0393700787 inches. Multiply this by 15 and you get 0.59055118 inches.

  2. What Is the equivalent of 15 mm socket in inches? - Answers

    Aug 9, 2023 · 14mm somcket is approx a 9/16th socket. 9/16 inches = 14.2875 mm Direct Conversion Formula 14 mm* 1 in 25.4 mm = 0.5511811024 in or 9/16

  3. What is the volume of 1 meter of 15mm pipe? - Answers

    May 21, 2024 · Assuming the tube is a circular pipe, the volume of water it can hold per meter can be calculated using the formula for the volume of a cylinder: V = πr^2h, where r is the radius of the tube ...

  4. How do you remove the alternator on a 2002 Chrysler Town and

    Oct 22, 2022 · This is moderately difficult. Disconnect the battery, use a 15mm box wrench to pull tensioner and slip belt off, there is a top bolt and a bottom bolt on alternator to take loose, also …

  5. and how do you change the starter on a Ford Windstar? - Answers

    Oct 23, 2022 · NOTE: Starter bolts are 13mm. Brakeline bracket bolt is 15mm.Do the opposite to install.While you have the starter off you have exposed the gear teeth on the edge of the flywheel.

  6. How can I remove a bike pedal and what is the correct ... - Answers

    Feb 17, 2025 · To remove a bike pedal, you will need a pedal wrench or a 15mm wrench. The correct direction to turn the pedal is counterclockwise to loosen it. Remember that the left pedal has reverse …

  7. What size allen key is needed for bike pedals? - Answers

    Feb 18, 2025 · What is the recommended wrench size for bike pedals? The recommended wrench size for bike pedals is typically 15mm.

  8. How to replace the serpentine belt on a Windstar? - Answers

    Oct 23, 2022 · Put a 15mm wrench on the bolt head in the middle of the pulley and leverage the tensioner to slack the belt and remove it.Answerif you're under the hood, look at all the pulleys. the …

  9. How do you remove the starter on a Chrysler Pacifica?

    Oct 23, 2024 · Remove the front exhaust manifold and remove the starter from the top.Pull the front exhast manifold and dipstick remove the 3 bolts with a 15mm socket or wrench pull the starter from …

  10. How do you replace the front wheel bearings and hub on a 1998-2003 ...

    Oct 26, 2022 · Add-on to the aboveI like to use a 3 jaw puller to push the axle back away from the steering knuckle/spindle to gain access to the top one of the three 15mm bolts that hold the …